|
|
|
|
|
|
|
NSS 26-9-282-1 Black Neoprene Front Squeegee for NSS Wrangler 27, 2730 Models with the Curved Rear Squeegee Assembly. Oil and chemical resistant notched front (inner) squeegee. Neoprene is used in cases where the standard duty tan gum blades won't hold up and distort. Neoprene blades are naturally chemical and oil-resistant and can be used in food processing plants, chemical plants and areas where tan gum blades might be affected by chemicals. They are also naturally chemical resistant and can be used where caustic chemicals exist. Works in conjunction with the tan gum rubber rear (outer) squeegee, NSS 2692831. Measures 40-7/16" x 1-7/8" with 16 notches (8 on each side) with no mounting holes (some models require a very similar blade with 4 mounting holes and 9 notches on each side. If this is yours, use our NSS 2693681, 42-3/4" w/4 mounting holes. These models usually have a level bubble on the squeegee frame). Fits NSS Wrangler models: 27 F/B-VS, 2730 (Big Wheel) Series. These blades fit on the Wrangler 27 F/B-VS series curved rear squeegee assembly number 2692799 and the 2730 "big wheel" model curved rear squeegee assembly number 3392959. These will not fit on the straight squeegee assembly on the NSS 33 or NSS 2730 (these require the twin urethane blade kit NSS 3390261, 38" Urethane). Wrangler 27 models with the straight squeegee frame require the 33" Urethane blades. Our NSS 2791061. Please check your inner squeegee measurements, lack of mounting holes, number of notches per edge, and parts manual before ordering. One front squeegee required per unit. Priced Each. Replaces NSS 2692821, 26-9-282-1. Our Part Number NSS 269282
|